
69
69EN
MANUAL ELDES ESIM264 V3.1
ATTENTION: In order to correctly remove the wireless device from the system, the user must remove the device using SMS text message
or ELDES Conguration Tool software and restore the parameters of the wireless device to default afterwards. If only one of these actions
is carried out, the wireless device and the system will attempt to exchange data to keep the wireless connection alive. This leads to fast
battery power drain on the battery-powered wireless device.
19.2. Wireless Device Information and Signal Status Monitoring
Once a wireless device is bound, the user can view the following information of a determined wireless device:
• Battery level (expressed in percentage).
• Wireless signal strength (expressed in percentage).
• Error rate (number of failed data transmission attempts in 10-minute period).
• Firmware version.
To view the wireless device information, please refer to the following conguration methods.
View wireless device
information
SMS
SMS text message content:
ssss_RFINFO:wless-id or ssss_RFINFO:Znn
Value: wless-id – 8-digit wireless device ID code; nn – wireless zone number, range – [13...
76].
Example: 1111_RFINFO:535185D
EKB2
Menu path:
Battery level: OK → CONFIGURATION → OK → aaaa → OK → WIRELESS DEVICES → OK →
wless-dev wless-id → OK → BATTERY
Wireless signal: OK → CONFIGURATION → OK → aaaa → OK → WIRELESS DEVICES → OK →
wless-dev wless-id → OK → SIGNAL
Error rate: OK → CONFIGURATION → OK → aaaa → OK → WIRELESS DEVICES → OK → wless-
dev wless-id → OK → ERROR RATE
Firmware version: OK → CONFIGURATION → OK → aaaa → OK → WIRELESS DEVICES → OK →
wless-dev wless-id → OK → FW RELEASE
Value: aaaa – 4-digit administrator password; wless-dev – wireless device model; wless-id
– 8-digit wireless device ID code.
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
The system supports up to 16 wireless devices. To view the number of unoccupied wireless device slots in the system, please refer to the
following conguration methods
View unoccupied
wireless device slots
SMS
SMS text message content:
ssss_STATUS_FREE
Example: 1111_STATUS_FREE
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
When the wireless signal between the system and a wireles device is lost and does not restore during 20 minute period, the system will
send notication by SMS text message to preset user phone number. By default, the notication regarding the wireless signal status is
enabled. To disable/enable this notication, please refer to 16. TAMPERS.
Comentários a estes Manuais