
USER MANUAL ELDES ESIM264 V1.0 5
EN
2.3 Date and time settings
It is important to set correct date and time, so that the system can send reports at specied times.
Date and time can be set by sending following format SMS message:
Where MMMM – means year, mn – month, dd – day, hh – hour, mi – minutes.
2.4 Enter and Exit time-out conguration
Manufacturer set 15 sec. delay time to leave the premises when security system is armed by keyboard or iButton. This parameter
can be adjusted by SMS text message and it is common parameter to the whole system.
The delay time is used for entering security code or placing iButton into the reader when disarming security system. Manufacturer
set 15 sec. delay time which can be separately adjusted for any Delay zone. Zone Z1 time can be also adjusted by SMS text message.
Time-out period can be congured by SMS message:
Where SSI – Z1 Delay zone entry time-out after activation in seconds. SSO – exit time-out after acti-
vation.
There is no time-out if period is set to 0.
2.5 iButton keys
First iButton key can be associated with the system just by touching it to the reader without the need to send any SMS messa-
ge. The system will beep twice informing about successful iButton key association and button will be saved into non-volatile
system memory.
Other iButton keys can be associated by entering special mode via SMS message:
It’s unique code will be recorded by the system. Again successful operation will be notied by double beep. The system allows to
associate and save up to ve iButton key.
E.g. The system will save and record every new button until fth button has been recorded. When all buttons have been associated
and recorded, it’s necessary to send SMS message:
This SMS command will block adding new buttons. Failing to send this SMS message, the system will not accept and respond to
iButton key. The iButton key can be erased one a at time or all at once by SMS:
This SMS command will erase all recorded buttons, and new buttons can be added as described above.
XXXX_MMMM.mn.dd_va:mi
XXXX_INOUT:SSI:SSO
XXXX_IBPROG:ON
XXXX_IBPROG:OFF
XXXX_RESETIB
ESIM 264
ESIM 264
1111 2010
.09.09
15:30
1111 INO
UT:20:30
Comentários a estes Manuais